SOUTHERN JOURNAL OF SCIENCES

Background: Industrial wastewater contains pollutants that are detrimental to human health in varied proportions. Among the pollutants are heavy metals, including Zn2+, Pb2+, and Cu2+ found in a characterized pharmaceutical wastewater. Several techniques have been proposed for the heavy metal sequester. However, they are with attendant challenges. The adsorption techniques using clay-metal oxide modified adsorbent/composite such as silver-clay adsorbent is considered suitable for an effective sequestering process. Aims: To develop and characterize Ag/clay adsorbent for pharmaceutical wastewater treatment. Methods: The Ag nanoparticles were synthesized using Parkia biglobossa aqueous leaves extract in an optimization study. The raw clay was beneficiated and doped with silver nanoparticles via the wet impregnation method. The silver-clay adsorbent was characterized using FTIR, XRD, SEM, and EDS characterization tools. The developed adsorbent was used for the batch adsorption process of the heavy metal ion removal from the wastewater. Results and Discussion: The phytochemical analysis and FTIR results of the P. biglobosa showed that the leaf contains phenol, tannin, and flavonoids which acts as reducing, capping, and stabilizing agent required for synthesizing the silver nanoparticles. The prepared silver nanoparticles modified clay adsorbent Ag/clay, have evenly distributed stacks of pseudo-hexagonal plates, are rich in silica, possess silver nanoparticles in the frameworks, and contain functional groups suitable for binding heavy metals. The adsorptions of Zn2+, Pb2+, and Cu2+ from pharmaceutical wastewater onto the silver-modified clay were studied as a function of adsorbent dosage and contact time. The percentage removal results obtained showed that the adsorbent had up to 99.96%, 99.5%, and 99.44% removal efficiency for Zn2+, Pb2+, and Cu2+, respectively, which are better compared with previous studies. The adsorption process was feasible, spontaneous, and exothermic, with Langmuir and Pseudo-second-order models as best fits for the process. Conclusions: The adsorption of selected heavy metal ions onto the green synthesized silver-modified clay adsorbent (Ag/clay) was feasible, spontaneous, and exothermic in the order Zn2+>Pb2+>Cu2+ with Langmuir and Pseudo-second-order model best fitted for the process. These show that the synthesized silver oxide nanoparticles supported on local clay can be used as a potentially low-cost adsorbent to remove heavy metal ions from industrial wastewater.

Background: Sexually Transmitted Infections (STIs) constitute an important group of infections with serious implications for public health. According to WHO, 1 million new contagions are produced daily, with more than 370 million new cases yearly. STIs can be originated from viruses, bacteria, fungi, or parasites. Regardless of their nature, they can be either cured or treated and controlled, but more importantly, they are preventable. Aims: The best tool to fight against STIs is prevention, which has a strong dependence on knowledge. This work aimed to assess the level of knowledge of society about STIs and gonorrhea. Methods: We conducted an online survey, covering a wide range of ages and levels of education, inquiring about areas such as origin, ways of contagion, prevention, associated diseases, and treatment of STIs and gonorrhea. We performed a statistical analysis of the answers. Results and Discussion: it was found that the general level of knowledge about STIs was independent of the age and level of education of the respondents. The respondent has shown better familiarity with prevention and contagion than with origin, diseases, and treatment. When the question was focused on gonorrhea, we found a lack in the cognizance of several points. Conclusions: Based on our findings, we conclude it is necessary to improve sexual education programs, starting at early ages but directed to all populations, particularly about gonorrhea.

Background: The interview with Professor Dr. Fernando Luiz Pellegrini Pessoa covers his extensive career and contributions to chemical engineering, focusing on innovations and sustainability. Objectives: To explore Professor Pellegrini's experiences in various areas of chemical engineering, including teaching methods, research in supercritical extraction, biodiesel production, and process intensification. Methods: Semi-structured interview addressing topics such as academic and industrial career, teaching methods, ongoing research, and future perspectives for the chemical industry. Results: Professor Pellegrini highlighted the importance of practical application of theoretical knowledge, the development of the Water Source Diagram method, advances in supercritical extraction and biodiesel production, and the need for process intensification in the industry. Discussion: The interview revealed the importance of integration between academia and industry, the need for teaching methods that facilitate learning, and the challenges in implementing sustainable and efficient technologies in the chemical industry. Conclusion: Professor Pellegrini emphasizes the importance of process intensification and sustainability in the evolution of the chemical industry. He highlights the need for greater collaboration between academia and industry to address future challenges and implement innovative solutions.