EFFECT OF MECHANICAL ACTIVATION ON THE POTASSIUM AVAILABILITY OF PHONOLITE ROCK
Background: Researchers are carried out to assess rocks containing potassium as an alternative source of fertilizers. These studies are important in reducing the external dependence of Brazil on this commodity. Phonolite is a rock of volcanic origin that has in its mineralogical composition the predominance of feldspar and has been potential to use as an alternative potassium source. The studied rock has 6% total-K but is unavailable to plants in natural rock. Aim: This project evaluated the effect of mechanical activation, wet and dry, on K availability for extractors different and its K leaching curves of phonolite from Poços de Caldas, MG, Brazil. Methods: Phonolite rock was subjected to mechanical activation for 30 and 60 min by wet and dry processes. Particle size distribution, XRD, and FTIR analyses characterized phonolite activated. These results were compared to the behavior of the rock with no activation. K availability (total; water-soluble; exchangeable, non-exchangeable, and structural) was determined in samples activated and no activation. K leaching curves were obtained by successive extractions with 0.01 mol L-1 citric acid and Mehlich-1 solutions to 1812 h and analyzed by FAAS. Results: The samples mechanical activation promoted a reduction in the intensity of the diffraction peaks. In the sample dry mechanical activation for 60 min, K released increased by 15% in relation to the no activation sample. K leaching curves were observed with similar behavior for the extractors and higher K availability after 235 h of total contact time. Discussion: Mechanical activation promoted a decrease in structural K and an increase in non-exchangeable K, released into the soil solution in the medium term. Since the mineralogical composition was not changed, the process action is more efficient in creating the structural defects suggested. K leaching curves corroborate these results, with a continuous and slow K released for a longer contact time. Conclusions: It was concluded that the phonolite activated by dry mechanical activation for 60 min increased K-released content compared with the wet process and ratified the possibility of the activated phonolite rock as a slow-release fertilizer.
Read ArticleADSORPTION STUDIES OF ZINC, COPPER, AND LEAD IONS FROM PHARMACEUTICAL WASTEWATER ONTO SILVER-MODIFIED CLAY ADSORBENT
Background: Industrial wastewater contains pollutants that are detrimental to human health in varied proportions. Among the pollutants are heavy metals, including Zn2+, Pb2+, and Cu2+ found in a characterized pharmaceutical wastewater. Several techniques have been proposed for the heavy metal sequester. However, they are with attendant challenges. The adsorption techniques using clay-metal oxide modified adsorbent/composite such as silver-clay adsorbent is considered suitable for an effective sequestering process. Aims: To develop and characterize Ag/clay adsorbent for pharmaceutical wastewater treatment. Methods: The Ag nanoparticles were synthesized using Parkia biglobossa aqueous leaves extract in an optimization study. The raw clay was beneficiated and doped with silver nanoparticles via the wet impregnation method. The silver-clay adsorbent was characterized using FTIR, XRD, SEM, and EDS characterization tools. The developed adsorbent was used for the batch adsorption process of the heavy metal ion removal from the wastewater. Results and Discussion: The phytochemical analysis and FTIR results of the P. biglobosa showed that the leaf contains phenol, tannin, and flavonoids which acts as reducing, capping, and stabilizing agent required for synthesizing the silver nanoparticles. The prepared silver nanoparticles modified clay adsorbent Ag/clay, have evenly distributed stacks of pseudo-hexagonal plates, are rich in silica, possess silver nanoparticles in the frameworks, and contain functional groups suitable for binding heavy metals. The adsorptions of Zn2+, Pb2+, and Cu2+ from pharmaceutical wastewater onto the silver-modified clay were studied as a function of adsorbent dosage and contact time. The percentage removal results obtained showed that the adsorbent had up to 99.96%, 99.5%, and 99.44% removal efficiency for Zn2+, Pb2+, and Cu2+, respectively, which are better compared with previous studies. The adsorption process was feasible, spontaneous, and exothermic, with Langmuir and Pseudo-second-order models as best fits for the process. Conclusions: The adsorption of selected heavy metal ions onto the green synthesized silver-modified clay adsorbent (Ag/clay) was feasible, spontaneous, and exothermic in the order Zn2+>Pb2+>Cu2+ with Langmuir and Pseudo-second-order model best fitted for the process. These show that the synthesized silver oxide nanoparticles supported on local clay can be used as a potentially low-cost adsorbent to remove heavy metal ions from industrial wastewater.
Read ArticleFROM ACADEMIA TO INDUSTRY: A JOURNEY OF INNOVATION IN CHEMICAL ENGINEERING - INTERVIEW WITH PROFESSOR FERNANDO LUIZ PELLEGRINI PESSOA. ENGLISH VERSION
Background: The interview with Professor Dr. Fernando Luiz Pellegrini Pessoa covers his extensive career and contributions to chemical engineering, focusing on innovations and sustainability. Objectives: To explore Professor Pellegrini's experiences in various areas of chemical engineering, including teaching methods, research in supercritical extraction, biodiesel production, and process intensification. Methods: Semi-structured interview addressing topics such as academic and industrial career, teaching methods, ongoing research, and future perspectives for the chemical industry. Results: Professor Pellegrini highlighted the importance of practical application of theoretical knowledge, the development of the Water Source Diagram method, advances in supercritical extraction and biodiesel production, and the need for process intensification in the industry. Discussion: The interview revealed the importance of integration between academia and industry, the need for teaching methods that facilitate learning, and the challenges in implementing sustainable and efficient technologies in the chemical industry. Conclusion: Professor Pellegrini emphasizes the importance of process intensification and sustainability in the evolution of the chemical industry. He highlights the need for greater collaboration between academia and industry to address future challenges and implement innovative solutions.
Read Article