WASTE FRYING OIL TRANSESTERIFICATION TREATED BY STEAM DRAG METHOD
Demand for diversified biodiesel feedstocks is high and increasing, but few are viable for large-scale production, and many of those selected compete with other sectors of the chemical industry. To improve energy and environmental sustainability, fatty acids from waste oils that are improperly disposed of and pollute the environment can be used for transesterification reactions. However, they need treatment to achieve high conversion rates. In this context, the aim of this work was to perform and analyze the treatment of residual frying oil with the evaporation and entrainment process, aiming at its use as raw material to obtain biodiesel (methyl esters) by a transesterification reaction. The physicochemical properties of the residual oil after treatment were characterized by moisture content, pH and the acidity, saponification, iodine, and peroxide index. The conversion rate of the residual oil to methyl esters was determined by 1H NMR analysis. After the treatment, the method of analysis of variance showed that the oil obtained a significant reduction of the saponification, iodine, peroxide and acidity indexes, being the acidity reduced from 9.36 to 7.85 mg KOH g-1. The moisture content of 0.733% and elevation of pH to 8.0. The conversion rate of fatty acid biodiesel of residual oil was 79.3 %, lower value of standards norms (ASTM, 2005; EN, 2008; ANP, 2014), showing that the assigned methodology for frying residual oil is inefficient in biodiesel production.
Read ArticleEVALUATION OF THE EFFECTIVENESS OF TREATMENT OF THE ORAL MUCOSA WITH PHYTO-OINTMENT BASED ON PHYTOECDYSTEROIDS
An indicator of the health of the human body in the state of the oral mucosa. Mechanical and chemical factors constantly influence it. At the first stage of the study, a comparative analysis of the frequency of various forms of traumatic injuries of the oral mucosa was carried out. The distribution of patients into groups was also carried out, depending on the medicinal product used. Then clinical examinations were carried out. After that, the therapy of traumatic erosive and ulcerative lesions of the oral mucosa began. The developed method for treating traumatic lesions of the oral mucosa with medicine based on phytoecdysteroids provides for eliminating the traumatic factor, applying ointment based on phytoecdysteroids to the dried out focus twice a day. The use of phyto-ointment leads to complete repair of traumatic erosive and ulcerative lesions of the oral mucosa on average by the eighth day from the start of treatment; a similar effect with the use of "Solcoseryl dental adhesive paste" is achieved by the tenth day, and the gel "Cholisal Dental" - at a later date, which is confirmed in this study. The most significant positive effect on the level of quality of life associated with the effectiveness of treatment of traumatic erosive and ulcerative lesions of the oral mucosa in comparison with the dental “Solcoseryl dental adhesive paste” and the gel “Cholisal Dental” is exerted by phyto-ointment, where a decrease in the total points was recorded. When conducting routine examinations of patients, it is necessary to pay attention to the oral mucosa damage. Moreover, in treating traumatic injuries of the oral mucosa, it is recommended to use phytoointment, which contains phytoecdysteroids.
Read ArticleCOMPARISON OF TWO STAINING METHODS FOR ANODIZING IN ALLOY 6063 ALUMINUM PROFILES
Background: Aluminum stands out for being a light, corrosion-resistant, and recyclable metal, achieving wide coverage in the market. When incorporated into alloying elements, it is possible to acquire other desirable characteristics. Alloy 6063, intended for architectural purposes, has aesthetic, structural, and strength functions. Anodized finishing is performed through an electrolytic process, ensuring a more resistant aluminum oxide film than that formed naturally. For decorative purposes, the anodic film coloration can be performed by several methodologies, in this case, for the coloration by organic adsorption, with the use of aniline, and the electrolytic coloration, composed of tin sulfate salts, both for obtaining the black color. Aim: Compare of two different staining methods on the surface of anodized profiles of aluminum alloy 6063. Methods: Profile samples were collected and tests were carried out to measure the thickness of the anodic layer, immersion tests with 3,5 percent sodium chloride, for 1000 hours, and neutral saline mist, for 600 hours. Results and Discussion: Both methodologies proved to be resistant to immersion tests with sodium chloride, as well as with neutral saline mist, and these tests are quite aggressive and provide corrosion of the material when not well treated. Corrosion points were only seen at the intersections performed, and in the rest of thearea, no points were detected. Conclusions: The result of both methodologies was positive, considering tht there was no corrosion in the tested samples, except in the intersections performed, as well as the maintenance of the color in both tested methodologies, which was not expected in the literature. For future work, it is suggested to deepen the study to perform electrochemical impedance spectroscopy tests for exaluate the strength of the anodic film and perform anodizing with the same parameters, however, with different anilines to analyze their behavior.
Read Article