COMPARISON OF TWO STAINING METHODS FOR ANODIZING IN ALLOY 6063 ALUMINUM PROFILES
Background: Aluminum stands out for being a light, corrosion-resistant, and recyclable metal, achieving wide coverage in the market. When incorporated into alloying elements, it is possible to acquire other desirable characteristics. Alloy 6063, intended for architectural purposes, has aesthetic, structural, and strength functions. Anodized finishing is performed through an electrolytic process, ensuring a more resistant aluminum oxide film than that formed naturally. For decorative purposes, the anodic film coloration can be performed by several methodologies, in this case, for the coloration by organic adsorption, with the use of aniline, and the electrolytic coloration, composed of tin sulfate salts, both for obtaining the black color. Aim: Compare of two different staining methods on the surface of anodized profiles of aluminum alloy 6063. Methods: Profile samples were collected and tests were carried out to measure the thickness of the anodic layer, immersion tests with 3,5 percent sodium chloride, for 1000 hours, and neutral saline mist, for 600 hours. Results and Discussion: Both methodologies proved to be resistant to immersion tests with sodium chloride, as well as with neutral saline mist, and these tests are quite aggressive and provide corrosion of the material when not well treated. Corrosion points were only seen at the intersections performed, and in the rest of thearea, no points were detected. Conclusions: The result of both methodologies was positive, considering tht there was no corrosion in the tested samples, except in the intersections performed, as well as the maintenance of the color in both tested methodologies, which was not expected in the literature. For future work, it is suggested to deepen the study to perform electrochemical impedance spectroscopy tests for exaluate the strength of the anodic film and perform anodizing with the same parameters, however, with different anilines to analyze their behavior.
Read ArticleHIGH BURDEN OF VITAMIN D DEFICIENCY AND FERRITIN-LINKED IMPACT IN Β-THALASSEMIA MAJOR
Background: Background: Vitamin D plays an essential role in bone health and overall physiological function, and its deficiency is common in children and adolescents with β-thalassemia major (βTM). Iron overload, as reflected by elevated ferritin, may further influence vitamin D status. Aim: This study aimed to evaluate serum vitamin D levels in βTM patients and determine their association with ferritin levels. Methods: A total of 40 βTM patients and 20 age-matched healthy controls (aged 4–25 years) were enrolled between October 2024 and February 2025. Serum vitamin D, calcium, ferritin, and hemoglobin were measured. Statistical analysis, including correlation and logistic regression, was performed using SPSS v.26 to identify predictors of vitamin D deficiency. Results: Vitamin D deficiency was highly prevalent among βTM patients (70%) compared with controls. Patients showed significantly lower vitamin D levels (17.32±1.56) than controls (25.34±1.76). Vitamin D levels were positively correlated with age (r = 0.788), calcium (r = 0.772), and hemoglobin (r = 0.771), and negatively correlated with ferritin (r = −0.517). Logistic regression demonstrated that ferritin >1000 ng/mL strongly predicted vitamin D deficiency (OR = 17.875; 95% CI: 3.258–98.074; p = 0.001), while younger age ( < 10 years) also increased the odds of deficiency (OR = 5.200; p = 0.018). Discussion: D deficiency is a prevalent and intrinsic metabolic disturbance in β-thalassemia major, closely linked to chronic iron overload and elevated ferritin levels. This interplay disrupts hepatic vitamin D hydroxylation, induces inflammation, and contributes to endocrine and skeletal complications, highlighting ferritin as a key predictor of deficiency in these patients. Conclusion: Vitamin D deficiency is highly prevalent in βTM and is strongly associated with elevated ferritin levels, suggesting that iron overload is a significant predictor. Integrating vitamin D assessment into routine monitoring may support better management of disease-related metabolic disturbances in patients with βTM.
Read ArticleEFFECT OF MECHANICAL ACTIVATION ON THE POTASSIUM AVAILABILITY OF PHONOLITE ROCK
Background: Researchers are carried out to assess rocks containing potassium as an alternative source of fertilizers. These studies are important in reducing the external dependence of Brazil on this commodity. Phonolite is a rock of volcanic origin that has in its mineralogical composition the predominance of feldspar and has been potential to use as an alternative potassium source. The studied rock has 6% total-K but is unavailable to plants in natural rock. Aim: This project evaluated the effect of mechanical activation, wet and dry, on K availability for extractors different and its K leaching curves of phonolite from Poços de Caldas, MG, Brazil. Methods: Phonolite rock was subjected to mechanical activation for 30 and 60 min by wet and dry processes. Particle size distribution, XRD, and FTIR analyses characterized phonolite activated. These results were compared to the behavior of the rock with no activation. K availability (total; water-soluble; exchangeable, non-exchangeable, and structural) was determined in samples activated and no activation. K leaching curves were obtained by successive extractions with 0.01 mol L-1 citric acid and Mehlich-1 solutions to 1812 h and analyzed by FAAS. Results: The samples mechanical activation promoted a reduction in the intensity of the diffraction peaks. In the sample dry mechanical activation for 60 min, K released increased by 15% in relation to the no activation sample. K leaching curves were observed with similar behavior for the extractors and higher K availability after 235 h of total contact time. Discussion: Mechanical activation promoted a decrease in structural K and an increase in non-exchangeable K, released into the soil solution in the medium term. Since the mineralogical composition was not changed, the process action is more efficient in creating the structural defects suggested. K leaching curves corroborate these results, with a continuous and slow K released for a longer contact time. Conclusions: It was concluded that the phonolite activated by dry mechanical activation for 60 min increased K-released content compared with the wet process and ratified the possibility of the activated phonolite rock as a slow-release fertilizer.
Read Article