SOUTHERN JOURNAL OF SCIENCES

Background: Industrial wastewater contains pollutants that are detrimental to human health in varied proportions. Among the pollutants are heavy metals, including Zn2+, Pb2+, and Cu2+ found in a characterized pharmaceutical wastewater. Several techniques have been proposed for the heavy metal sequester. However, they are with attendant challenges. The adsorption techniques using clay-metal oxide modified adsorbent/composite such as silver-clay adsorbent is considered suitable for an effective sequestering process. Aims: To develop and characterize Ag/clay adsorbent for pharmaceutical wastewater treatment. Methods: The Ag nanoparticles were synthesized using Parkia biglobossa aqueous leaves extract in an optimization study. The raw clay was beneficiated and doped with silver nanoparticles via the wet impregnation method. The silver-clay adsorbent was characterized using FTIR, XRD, SEM, and EDS characterization tools. The developed adsorbent was used for the batch adsorption process of the heavy metal ion removal from the wastewater. Results and Discussion: The phytochemical analysis and FTIR results of the P. biglobosa showed that the leaf contains phenol, tannin, and flavonoids which acts as reducing, capping, and stabilizing agent required for synthesizing the silver nanoparticles. The prepared silver nanoparticles modified clay adsorbent Ag/clay, have evenly distributed stacks of pseudo-hexagonal plates, are rich in silica, possess silver nanoparticles in the frameworks, and contain functional groups suitable for binding heavy metals. The adsorptions of Zn2+, Pb2+, and Cu2+ from pharmaceutical wastewater onto the silver-modified clay were studied as a function of adsorbent dosage and contact time. The percentage removal results obtained showed that the adsorbent had up to 99.96%, 99.5%, and 99.44% removal efficiency for Zn2+, Pb2+, and Cu2+, respectively, which are better compared with previous studies. The adsorption process was feasible, spontaneous, and exothermic, with Langmuir and Pseudo-second-order models as best fits for the process. Conclusions: The adsorption of selected heavy metal ions onto the green synthesized silver-modified clay adsorbent (Ag/clay) was feasible, spontaneous, and exothermic in the order Zn2+>Pb2+>Cu2+ with Langmuir and Pseudo-second-order model best fitted for the process. These show that the synthesized silver oxide nanoparticles supported on local clay can be used as a potentially low-cost adsorbent to remove heavy metal ions from industrial wastewater.

Today, salinity stress causes extensive damage to crops, and high soil salinity is one of the limiting factors for crop yields. A practical approach to lessen the negative effect of salinity stress is to use mineral nutrition methods such as spraying plants with silicone. To investigate and compare the effect of silicon and silicon nano-chelate on the wheat plant resistance (Shiroodi cultivar) to salinity stress, a factorial experiment was designed and conducted in a completely randomized design with five replications under hydroponic conditions. Experimental treatments included concentrations of 0 and 2 mmol/L silicon, 0 and 0.424 g/L silicon nano-chelate, 0 and 150 mmol/L sodium chloride, and their interaction. The growth and physiological indices showed that salinity stress decreasing effect on shoot dry weight, root fresh weight, catalase activity, and ascorbate peroxidase. These increases indicate the activation of the plant defense system against salinity stress conditions. The results also showed that silicon nano-chelate treatment under salinity stress reduced dry and fresh weights of roots and shoots. These two compounds additionally influenced the content of catalase activity, ascorbate peroxidase, and superoxide dismutase content in shoots. Simultaneously, the silicon and silicon nano-chelate treatment under salinity stress reduced the dry and fresh weight of roots and shoots, catalase activity, and ascorbate peroxidase. Therefore, the results obtained in this study generally showed that silicon under salinity stress increased plant growth and positively affected the activity of its antioxidant system. But silicon nano-chelate not only did not improve plant performance but also reduced its growth.

Background: This study explores the potential use of biomass residues from soybean pressing via static pyrolysis to produce carbonaceous materials for pesticide adsorption. It emphasizes concerns regarding the environmental impact of agroindustrial waste and the persistent nature of pesticides in soil and water systems. Aims: To investigate the efficacy of biochar obtained from soybean waste in adsorbing pesticides. Specifically, to analyze the gas products generated during pyrolysis and characterize the obtained carbonaceous material for its adsorption capabilities. Methods: Soybean residue underwent static pyrolysis at various temperatures and durations. Gas analysis utilizing FTIR spectroscopy identified the gaseous products generated during the pyrolysis process. The obtained biochar underwent successive washes and characterization through FTIR spectra comparison with commercial activated carbon. Through absorption assays, using UV-VIS spectroscopy, investigations were conducted on the solid biocarbon fractions to evaluate their capacity for absorbing pesticides. Results: Gas Analysis: The study revealed the production of volatile organic compounds (VOCs) and highlighted the prevalence of mono-carbon compounds with increased temperature and pyrolysis time. The analysis demonstrated consistent carbon mass percentages across different reaction conditions. Characterization of Biochar: Comparison with activated carbon indicated structural similarities with heightened intensity in certain bands, suggesting the presence of incomplete cellulose cracking in the obtained biochar. Regarding the Chlorothalonil, Atrazine and DIcamba remotion, notably, the concentration of Chlorothalonil in a 7:3 water: acetonitrile solution decreases by 77 % through adsorption on the carbons. Discussion: The investigation examined the adsorption efficiency of the biochar for Chlorothalonil, Atrazine, and Dicamba from aqueous solutions. Chlorothalonil exhibited substantial retention by the biochar, while Atrazine showed comparatively lower adsorption effectiveness. Remarkably, Dicamba did not demonstrate retention by either the biochar or activated carbon. Conclusion: The study underscores the potential of pyrolyzed soybean waste for pesticide adsorption, particularly highlighting Chlorothalonil's strong affinity with the carbonaceous structure. Further research is needed to optimize adsorption properties and explores potential enhancements of these materials through additional treatment methods, offering promising avenues for environmental remediation.