THE INFLUENCE OF CLIMATIC FACTORS ON THE CHANGE IN THE ELASTIC-STRENGTH INDICATORS OF EPOXY POLYMERS BINDERS USED IN LIQUID THERMAL INSULATION COATINGS
Introduction: Thermal insulating coatings are increasingly being introduced into construction practice for internal and external finishing enclosing structures and pipelines. Thermal insulation coatings are usually made based on polymer binder and mineral fillers. The durability and stability of the properties of heat-insulating materials depend on the type of binder. As a rule, polymers are used as a binder: epoxy resin; silicone rubber; urea-formaldehyde resins; aqueous dispersed polymers - styrene-butadiene, polyvinyl acetate, and acrylate (acrylic and styrene-acrylic). The quality indicator of binders can be assessed by the influence of the seasonality of climatic impact, and as a result, the best elastic strength characteristics of binders can be established after one month to a year of field tests. Aim: To determine the influence of climatic factors on the change in the elastic-strength indicators of epoxy polymers binders used in liquid thermal insulation coatings. Methods: A tensile testing machine of the AGS-X series with the TRAPEZIUM X software was used for mechanical tests. The tests were carried out in accordance with GOST 11262-2017 (ISO 527-2: 2012) "Plastics. Tensile test method". Results and Discussion: The paper discusses the results of experimental studies of the compositions of polymer binders and their resistance to various climatic factors, which will later be used as a polymer binder for thermal insulation coatings based on fine mineral granular systems. Conclusions: When analyzing the changes in the characteristics of polymer samples after exposure to climatic factors, it was found that compositions based on Etal-247 epoxy resin, cured with amine hardeners Etal-1440N, Etal-1460, Etal-1472, and Etal-45M, demonstrate the best elastic strength characteristics after one year of full-scale tests. The high stability of the indicators under consideration allows us to conclude that the use of Etal-247 resin as a base leads to creating of the most climate-resistant epoxy coatings.
Read ArticleTHE ROLE OF THE MEDITERRANEAN DIET IN PREVENTING MALE INFERTILITY: AN INTERVIEW WITH DR. MIGUEL FORNES (US-EN VERSION)
Background: Dr. Miguel Fornes is a researcher at CONICET and director of the Andrological Research Laboratory of Mendoza, Argentina. His research focuses on how dietary fat excess and hypercholesterolemia affect sperm physiology and male fertility. Objectives: The primary objective of Dr. Fornes' research is to investigate the effects of a high-fat diet on sperm function, capacitation, acrosomal reaction, and fertilization. He aims to develop translational animal models to study these effects without using human subjects. Methods: Dr. Fornes and his team use rabbit models to induce hypercholesterolemia through a high-fat diet. They then study the physiology and function of sperm cells from these hypercholesterolemic rabbits. Key parameters analyzed include cholesterol content in sperm membranes, ability to undergo capacitation and acrosomal reaction, and fertilization capability. Results: The studies revealed that hypercholesterolemia caused by a high-fat diet leads to increased cholesterol levels in sperm. This interferes with the normal physiology of sperm cells. In particular, many sperm from hypercholesterolemic rabbits were unable to properly undergo the acrosomal reaction, a crucial step for successful fertilization of the oocyte. This suggests high-fat diets could contribute to male infertility. Conclusions: The research highlights the importance of diet and lifestyle on male reproductive health. Dr. Fornes recommends a balanced diet like the Mediterranean diet, rich in fruits, vegetables, and olive oil, to maintain healthy sperm function and fertility. Replacing animal fats with olive oil may help prevent hypercholesterolemia-related infertility. The findings have implications for dietary guidelines and clinical interventions to support male fertility.
Read ArticleD-DIMER A RISK FACTOR ASSOCIATED WITH C-REACTIVE PROTEIN FOR PREDICTING THE SEVERITY OF INFECTION BY COVID-19
Background: COVID-19, caused by SARS-CoV-2, has unresolved mortality risk factors and clinical course, highlighting the need for further research. Aims: The study aimed to asses D-dimer and C-Reactive Protein (CRP) as the risk factors for severity covid-19 and who are less capable of surviving. Methods: A retrospective study conduct of COVID-19 in adult inpatients aged >20 at Al-sadder and Alamal Hospital in Iraq. Demographics, clinical trials, treatments, and viral RNA samples were analyzed. The study involved 100 patients, with 67 discharged and 33 hospitalized died. The majority of the participants 45% were aged < 40, but 55% were aged >40 years. Results: A significant and 57% were male 37(55.2%) Survivor vs. 20 (60.6%) non-survivor, p=0.024), more than 43% were female (30(44.8%) Survivor vs. 13(39.4%) non-survivor, p=0.010. Patients had underlying comorbidities (66%), survivor 37(55%), and non-survivor 29(87%). The most prominent comorbidity in non-survivors more than survivors was diabetic mellitus 85%, asthma 58%, stroke 48%, renal failure 42%, heart strake 33%, and hypertension 18%. The study found significant differences in WBC, lymphocyte count, D-dimer, Ferritin, CRP, and LDH levels in non-survivors compared to survivor patients, with a positive correlation between D- dimer and these parameters. The ROC analysis curve showed CRP with a high AUC of 80.2%, 87.9% sensitivity, and 37.3% specificity, while D-dimer and LDH had AUCs of 0.74.9 and 70%, respectively. Discussion: The study found that older age, higher d-dimer, ferritin, CRP, and LDH are associated with disease severity and higher mortality risk in adult COVID-19 patients. Conclusions: These biomarkers could aid in early detection of disease progression signs and better patient management
Read Article