FROM ACADEMIA TO INDUSTRY: A JOURNEY OF INNOVATION IN CHEMICAL ENGINEERING - INTERVIEW WITH PROFESSOR FERNANDO LUIZ PELLEGRINI PESSOA. ENGLISH VERSION
Background: The interview with Professor Dr. Fernando Luiz Pellegrini Pessoa covers his extensive career and contributions to chemical engineering, focusing on innovations and sustainability. Objectives: To explore Professor Pellegrini's experiences in various areas of chemical engineering, including teaching methods, research in supercritical extraction, biodiesel production, and process intensification. Methods: Semi-structured interview addressing topics such as academic and industrial career, teaching methods, ongoing research, and future perspectives for the chemical industry. Results: Professor Pellegrini highlighted the importance of practical application of theoretical knowledge, the development of the Water Source Diagram method, advances in supercritical extraction and biodiesel production, and the need for process intensification in the industry. Discussion: The interview revealed the importance of integration between academia and industry, the need for teaching methods that facilitate learning, and the challenges in implementing sustainable and efficient technologies in the chemical industry. Conclusion: Professor Pellegrini emphasizes the importance of process intensification and sustainability in the evolution of the chemical industry. He highlights the need for greater collaboration between academia and industry to address future challenges and implement innovative solutions.
Read ArticleANALYTICAL METHODS FOR METHANOL DETECTION IN ALCOHOLIC BEVERAGES: A COMPARATIVE REVIEW OF CLASSICAL, COLORIMETRIC, AND CHROMATOGRAPHIC APPROACHES
Introduction: The detection of methanol in alcoholic beverages represents a critical public health issue, particularly in light of the recent outbreak of poisonings in Brazil, which registered 58 confirmed cases and 15 deaths through October 2025. Methanol's toxicity, with an estimated lethal dose ranging from 0.5 to 1.5 g/kg, requires reliable analytical methods for health surveillance. Brazilian legislation establishes a maximum limit of 20 mg/100 mL of anhydrous alcohol; however, the need for accessible screening methods in field settings remains an important challenge. Objective: To critically compare three analytical methods for methanol determination: classical qualitative methods (Lucas Test and dichromate/Schiff), Brazilian colorimetric method, and gas chromatography with flame ionization detector (GC-FID), evaluating their performance and applicability in resource-limited contexts. Methods: Theoretical-comparative approach through critical analysis of specialized literature and normative technical documentation. Methods were evaluated according to: operational principle, sensitivity (LOD/LOQ), selectivity, operational complexity, analysis time, and practical applicability. Results: The Lucas Test is not applicable for methanol detection. Colorimetric methods showed moderate sensitivity (LOD ~20-160 mg/100 mL), a 10-30-minute execution time, low operational complexity, and excellent portability. The Brazilian method presented chemical equivalence with international standards, differing only in the type of reading performed. GC-FID has shown superior sensitivity (LOD ≤ 1 mg/100 mL) and high specificity, but it requires extended time (~45-60 minutes), complex laboratory infrastructure, and specialized operators. Sugars interfere with colorimetric methods. Conclusions: The methods are complementary within a hierarchical system. Colorimetric methods enable rapid field screening, while GC-FID serves as the confirmatory method for forensic analyses. We recommend implementing integrated protocols that combine in situ colorimetric screening with GC-FID confirmation in accredited laboratories for effective health surveillance.
Read ArticleGRAPHICAL METHOD FOR DETERMINATION OF MQ-SERIES GAS SENSOR CIRCUIT PARAMETERS FOR A STAND-ALONE GAS ALARM SYSTEM
Background: MQ-series gas sensors belong to the metal oxide semiconductor (MOS) family of sensors that can sense the presence of many gases. These sensors find their application in gas alarm systems as key components. While necessary sensor circuit output voltage value for alarm point in a stand-alone gas alarm system is desirable, but what exact combination of the sensor circuit parameters is required? Hitherto, the determination of these circuit parameters has not been given much attention in the research community. Aim: the purpose of this work is to explore a structured graphical approach of determination of MQ series gas sensor circuit parameters for a stand-alone gas alarm system that yields desired sensor circuit output voltage value for the alarm point; the main objective of the study was to develop mathematical model equations that relate the: (i) sensor resistance (RS) with the gas concentration (x) and the sensor resistance at standard calibration concentration of the sensor base gas in the clean air (Ro) and (ii) sensor circuit output voltage (VRL), load resistance (RL) and sensor resistance (RS). It is expected from the model equations developed that graphical correlations of the sensor circuits parameters will be generated. Using these graphs for a particular case of an MQ-4 gas sensor under the influence of LPG, the parameters that yield desired sensor circuit output voltage of 2V for 1000 ppm of LPG alarm point will be determined. Methods: Model equations were developed for the sensor dynamics, and based on these model equations, graphs for the determination of required sensor parameters were plotted for a case of MQ-4 gas sensor response to LPG. Results and Discussion: The results yielded optimal values for R_O,R_S and R_L of 20 kΩ, 30 kΩ and 20 kΩ respectively, for alarm settings of 1000 ppm and a desired sensor circuit output voltage of 2 V. Based on determined parameters, the calibration equation for determination of best concentration value for a given value of emulated LPG concentration was developed. Using the method proposed in this study makes the process of determining the MQ-series gas sensor circuit parameters less cumbersome as their value can easily be obtained from the resulting graphs. Conclusions: a structured graphical approach for determination of MQ-series gas sensor circuit parameters for alarm points in a stand-alone gas alarm system showed that using MQ-4 gas sensor and LPG as the target gas, and for a sensor circuit output voltage of 2 V for alarm point at 1000 ppm of LPG, the corresponding value of R_O, R_S and R_L obtained were 20 kΩ, 30 kΩ, and 20 kΩ respectively. Hence, a structured graphical approach is suitable for determining MQ series gas sensor circuit parameters for a stand-alone gas alarm system under the influence of its associated gases.
Read Article