Latest Edition Highlights (Issue 39)

Featured articles from our most recent publication

INQUIRY FOR SUITABLE LOCATIONS FOR A DRILLING REGIME AT AN UPSLOPE ROCKY KNOLL OF LAWU ESTATE, WESTERN BYPASS, MINNA, NIGERIA

Background: A client requested that the study group help determine locations that would be suitable for a drilling regime at his lot, located at an upslope rocky knoll of Lawu Estate, Minna, Nigeria. Aim: The aim of this study is to carry out a purpose-specific survey to pinpoint the best locations in a built-up property at the upmarket Lawu Estate that would be suitable for a drilling regime targeted for household consumption. Methods: The study area was reconnoitered by the survey crew in order to georeference the locations that would be occupied for the vertical electrical sounding survey in the 30 m x 20 m lot. Owing to the extensive build-up at this lot, only a four-point traverse along the 30-metric dimension traverse of the frontage of the building was demarcated in the northeasterly direction, thereby limiting the desire of the survey crew to define an appropriate survey grid. The data-acquisition pattern at the 4 x 1 survey stations of the frontage-traverse of the lot followed the “traditional” sequence of Schlumberger array layout measurements, whence the survey crew progressed with current-electrode spacing either end of a survey point located at this frontage-traverse targeting a maximum survey depth of 100 m. Result: The acquired vertical electrical-sounding data set for this study was recorded on purpose-specific data sheets. Discussion: Based on empirical rules-of-thumb procedures for interpreting vertical electrical sounding data at the Nigerian Basement Complex geological province, “assured” groundwater location and “strongly aquiferous” location, deductive inferences were drawn with regards to only vertical electrical sounding Station 4. Conclusion: Thus, it is recommended that VES Station 4 be exploited in the planned drilling program of the client, especially since this survey point checks off 100 percent of the constraints imposed by the rules-of-thumb interpretation procedures.
Read Article

THE REVOLUTION IN AMERICAN PUBLIC HEALTH POLICY: PETROLEUM-BASED DYES AND THE CHRONIC DISEASE EPIDEMIC

Background: The American food regulatory landscape has historically been influenced by industry interests, resulting in the widespread use of petroleum-derived synthetic food dyes banned in European countries. Chronic disease rates in American children have increased from 3% in the 1960s to approximately 60% currently, with annual healthcare costs reaching $1 trillion. The appointment of Robert F. Kennedy Jr. as Secretary of Health and Human Services marks a paradigmatic shift toward transparency and industry accountability in food safety regulation. Aim: This forum analysis examines Kennedy Jr.'s revolutionary approach to food safety regulation, particularly his confrontational stance against petroleum-based food additives exemplified by his statement, "if they want to eat petroleum, they should add it themselves at home" and evaluates the broader implications for American public health policy and global regulatory standards. Methods: Critical analysis of Kennedy Jr.'s public policy statements, examination of epidemiological data trends, and evaluation of proposed regulatory frameworks through content analysis of official speeches and policy declarations from the Department of Health and Human Services. Results: Kennedy Jr.'s administration targets the systematic elimination of synthetic food dyes through industry partnerships, scientific transparency initiatives, and restoration of rigorous research standards. His confrontational rhetorical approach, compared to Mike Tyson's boxing style, has generated unprecedented industry cooperation with food companies "calling almost daily" seeking compliance guidance. The strategy combines voluntary industry agreements with open-source information databases and enhanced FOIA access. Discussion: This confrontational rhetoric represents unprecedented directness in health policy communication, challenging decades of established regulatory practices. The approach prioritizes scientific transparency over diplomatic language, generating both media attention and voluntary industry engagement that traditional regulatory pressure failed to achieve. Conclusions: Kennedy Jr.'s revolutionary stance may establish new global standards for food additive oversight, prioritizing public health over commercial interests through evidence-based policymaking and industry accountability measures. This paradigm shift from reactive to preventive regulatory models could influence international food safety governance and restore American leadership in global health policy.
Read Article

INTERVIEW WITH DEPUTY VICE CHANCELLOR DR. O. A. OMOTESHO, UNIVERSITY OF ILORIN, NIGERIA (ENGLISH VERSION)

Background: The University of Ilorin, founded in 1975 in Nigeria, has evolved from 3 to 16 faculties, becoming the country's most sought-after institution for the past two decades. Aims: To document the institutional evolution, identify the most demanded programs, assess scientific output, examine internationalization strategies, and understand strategic development objectives. Methods: Structured interview with Vice-Chancellor Dr. Olubumi Abayomi Omotesho, following a standardized protocol covering historical, academic, scientific, and strategic aspects of the institution, under Creative Commons license format. Results: The university expanded to 16 faculties in 49 years. The most demanded programs are Medicine and Nursing, followed by Pharmacy, Law, Engineering, and Accounting. Areas with the highest scientific output: Medicine, Biological/Agricultural Sciences, and Engineering. It offers 340 postgraduate programs with approximately 7,523 students. There is a dedicated infrastructure for internationalization, with plans for international accommodations. Discussion: The predominance of healthcare courses reflects global employability trends. Research aligned with Sustainable Development Goals demonstrates a contemporary vision. The institutional goal (number one in Nigeria, top 10 in Africa, top 500 globally) shows a measurable strategic approach. Commitment to internationalization aligns with global education trends. Conclusions: The institution exemplifies an evolving African university focused on academic excellence, scientific relevance, and internationalization. The prioritization of student-centered development, clear positioning goals, and international collaboration initiatives establish solid foundations for its contribution to regional and global knowledge.
Read Article

General information

SOUTHERN JOURNAL OF SCIENCES

    General information about this journal
  • Title: SOUTHERN JOURNAL OF SCIENCES
  • Short Title: South. J. Sci.
  • ISSN: 2764-5959 (Online); ISSN: 2764-5967 (Print)
  • Universal Decimal Classification (UDC): 001
  • Review Process: Double-Blind Peer-Review
  • Accessibility: Platinum Open Access, NO-APCs.
  • Digital preservation: Portico
  • Frequency of Publication: biannual [2 issues per year]. Journal publication schedule
  • DOI: 10.48141/2764-5959
  • Website: https://www.sjofsciences.com/
  • Country: BRAZIL
  • Publisher: Araucária - Scientific Association.
  • Language of Publication: ENGLISH / PORTUGUESE*
  • *Year that the Journal started accepting manuscripts in Portuguese: 2020
  • First issue year: 1993
  • Free full text: Yes
  • Indexed in: Index Copernicus; Latindex, and I2OR.
  • Formerly known as the Southern Brazilian Journal of Chemistry (1993 to 2021).
  • Former ISSN: 2674-6891 (Online); Former ISSN: 0104-5431 (Print).
  • Website last update: 06/07/2025.

Journal last cover


Last Cover

DOWNLOAD

Selected Articles for Additional Reading (2018 - Present)

Discover more great content from our archive

MANAGEMENT MODEL FOR CONSTRUCTION WASTE PRODUCED IN THE CITY OF RIO DE JANEIRO

Background: A new management model for construction and demolition waste (CDW) was proposed for the city of Rio de Janeiro, hence waste the city planning area estimated generation; the results were compared with the data published by COMLURB and SNIS through the statistics tests was proved that CDW had been dispersed, which support the hypothesis that the current model cause dispersion of the rubble. Aim: This study proposes a new management model for CDW to the city, according to regions where occur the higher production of rubble. Methods: The estimation of rubble was obtained through the issued licenses from 2006 to 2020 published by SMPU. The quantification of rubble in the city was carried out by adopting the generation indicator from licensed construction activities. The amount of CDW published by COMLURB and SNIS was compared through statistics tests ANOVA and T-Test, the second period from 2006 to 2020 and 2011 to 2020. To measure the area to implant a CDW recycling plant, criteria from production capacity were used. Results: ANOVA test to data from 2006 to 2020 and 2011 to 2020, according to a confidence interval of 95%, found the P value 0.589 and 0.022, respectively, it was verified that the significant difference is between data from COMLURB and Estimated. The T-test was applied from the same period in data from SNIS and estimated the P values 0.399 and 0.014. Discussion: The data from Estimating between 2006 and 2020 showed the best representation. The Área de Planejamento – AP (Planning Area) 4 was where 50.70% of the total rubble, after the AP 3 with 17.66%, the AP 5 was estimated at 16.59%, last of all, AP 2 and AP 1 were calculated the generation of 8.28% and 6.77%, respectively. Therefore, sizing the CDW recycling producing 361,99.00 tons per year demands an area of 32,397.50 m². Conclusions: It was concluded that the receipt of CDW in transfer stations managed by COMLURB is not allowed; therefore, the need to create a construction waste recycling plant was presented, to this end, it is necessary to have an available area of approximately 32,397.50 m².
Read Article

EXPERIMENTAL SUBSTANTIATION OF MANURE FRACTIONATION ON PIG FARMS USING A SPIRAL-SCREW MECHANISM

The main vector of mechanization and automation of livestock farming at the present stage of technological development of producers is the improvement of resource-saving technologies and technical devices that enables agricultural producers to produce relatively expensive and high-quality equipment to improve conditions for the animals. This article was considered a method for effective fractionation of manure on pig farms to further obtain humus for soil fertilization. The optimal conditions for the performance of the presented gadget were identified, namely: the time spent by the manure mass in the rotor is 0.1, with a separation factor of 170 to 180, the partition for the filter is made of metal sheet with holes whose diameter varies from 0.8 to 1.5 mm and a thickness of no more than 1 mm. The device presented in the manuscript has several advantages in the form of automation, low energy consumption and cost, novelty, and high efficiency.
Read Article

INTERACTIVE 3D RECONSTRUCTION AND DLT CAMERA CALIBRATION: A MANUAL REGISTRATION APPROACH

Background: This paper presents a straightforward and intuitive method for interactive 3D reconstruction and Direct Linear Transformation (DLT) camera calibration using a single image of a structured scene with known object dimensions. The method relies on manual registration of pairs of points on both the image and the terrain, allowing for precise alignment and calibration. Aim: By utilizing this method, users can easily reconstruct 3D scenes and calibrate cameras without the need for complex algorithms or extensive computational resources. Our approach offers a user-friendly solution for 3D reconstruction and camera calibration, making it accessible to a wider audience and applicable in a range of fields such as computer vision, augmented reality, and virtual reality. Methods: This work primarily focuses on the determination of the projection matrix, which plays a crucial role in mapping 3D points onto a 2D image plane. The projection matrix encapsulates both the intrinsic parameters of the camera (such as focal length and optical center) and the extrinsic parameters (such as camera position and orientation in the world coordinate system). By accurately determining the projection matrix, we can effectively project 3D points onto the 2D image plane, enabling tasks like 3D reconstruction, camera localization, and augmented reality applications. Results: We present experimental results obtained from testing the method on an image of a known object, demonstrating its effectiveness and accuracy in producing realistic 3D reconstructions. Discussion: The method's reliance on manual registration of point pairs allows for precise alignment and calibration without the need for complex algorithms or extensive computational resources. This user-friendly approach makes 3D reconstruction and camera calibration accessible to a wider audience and applicable in various fields. Conclusions: Overall, our approach offers a practical and accessible solution for 3D reconstruction and camera calibration, expanding the potential applications in computer vision, augmented reality, and virtual reality.
Read Article

Other relevant news

SOUTHERN JOURNAL OF SCIENCES

The SOUTHERN JOURNAL OF SCIENCES publishes articles in Chemistry, Physics, Mathematics, Biology, Pharmacy, Medicine, Engineering, Industrial Science, Agriculture, and related interdisciplinary areas and is intended to fill a gap in terms of scientific information worldwide. All manuscripts can be published either in English or Portuguese, with tile, abstracts, and keywords in English. At present, there are NO PUBLICATION FEES. Editors will cover web hosting, open access, DOI number, and other service costs.

We have set high standards for the articles to be published by ensuring strong but fair refereeing by at least two reviewers. We hope that this Journal will provide a forum for disseminating high-quality research in chemistry and related areas and are open to any questions and suggestions. Starting in 2020, the SOUTHERN JOURNAL OF SCIENCES will have two issues per year (June and December).

Thank you very much for choosing the SOUTHERN JOURNAL OF SCIENCES to publish your paper!
Editorial Team

THANK YOU FOR YOUR PRESENCE


It was an honor the have you with us.

Last Cover

Crossref Content Registration logo
Portico logo