SOUTHERN JOURNAL OF SCIENCES

Background: The recovery of any valuable component from dolomite as a double carbonate mineral depends on its dissolution efficiency. Aim: This study aimed to optimize and provide a simplified novel approach to the kinetics of dolomite dissolution in sulphuric acid solution using the Box-Behnken experimental design. Methods: The dolomite sample was dissolved in a sulphuric acid solution at seventeen different experimental conditions. The residue containing impurities was removed via filtration, while precipitation was carried out at the optimum conditions. Results and Discussion: The relationship between the independent and dependent variables best fits into the two-factor interaction model with a coefficient of determination of 0.9492, adjusted R² of 0.9187, and predicted R² of 0.7514. The total residual sum of 3x10^-13 and adequate precision of 18.769 show that the predicted dissolution efficiency is much closer to the experimental values. The analysis of variance revealed that the individual effect of acid concentration, temperature, and dissolution time all positively contribute to the dissolution. The interactive effect of acid concentration with temperature and the interactive effect of temperature with dissolution time also positively influences the dissolution efficiency. Following the dissolution of dolomite in sulphuric acid, a white precipitate was formed at room temperature, which dissolved back at a temperature of 70 oC, agitation speed of 900 revolutions per minute, and within 10 minutes. A predictive approach using a two-factor interactive model was applied to generate the kinetic data. Conclusions: The established model equation is suitable for predicting dolomite dissolution in sulphuric acid. The application of the shrinking core model to the generated data shows that the reaction between dolomite and sulphuric acid is film diffusion control with a first-order reaction (0.6587) and activation energy of 27.5 KJmol-1k-1.

Background: in the last decades, colocalization analysis of fluorescently tagged biomolecules has proven to be a powerful approach to studying functional relationships between these biomolecules. However, in many cases, to give this analysis a biological meaning, colocalization coefficients must be tested statistically, comparing them with the colocalization expected by chance. Aim: It addressed the statistical significance of triple colocalization to distinguish real triple colocalization and classify different triple signal scenarios. Methods: we use biological and generated images of triple signal scenarios to contrast seven independent statistical facts with independent statistical tests. Three of these tests correspond to pairwise relationships (double scrambling tests), and the others correspond to triple relationships: single scrambling tests (red, green, and blue scrambling) and the triple scrambling test. The analysis and methodology proposed can be reproduced using the application developed in our laboratory. Results: In the study approach, we found true triple relationships ignored by using traditional methods of computing the statistical significance, while we could reinterpret cases of not significant triple colocalization wrongly considered as significant by traditional methods. Discussion: single scrambling tests can reveal significant triple colocalization for low levels of triple co-occurrence, even when all pairwise relationships were exclusion relationships. Moreover, on the other hand, single scrambling tests can reveal the absence of a significant triple colocalization for high levels of triple co-occurrence, even when all pairwise relationships were significant colocalization. Conclusion: all scrambling tests are useful to classify a specific scenario of a triple relationship. Dynamics like mitosis can be distinguished into their phases by triple signal relationships using these 7 independent statistical tests.

Background: Industrial wastewater contains pollutants that are detrimental to human health in varied proportions. Among the pollutants are heavy metals, including Zn2+, Pb2+, and Cu2+ found in a characterized pharmaceutical wastewater. Several techniques have been proposed for the heavy metal sequester. However, they are with attendant challenges. The adsorption techniques using clay-metal oxide modified adsorbent/composite such as silver-clay adsorbent is considered suitable for an effective sequestering process. Aims: To develop and characterize Ag/clay adsorbent for pharmaceutical wastewater treatment. Methods: The Ag nanoparticles were synthesized using Parkia biglobossa aqueous leaves extract in an optimization study. The raw clay was beneficiated and doped with silver nanoparticles via the wet impregnation method. The silver-clay adsorbent was characterized using FTIR, XRD, SEM, and EDS characterization tools. The developed adsorbent was used for the batch adsorption process of the heavy metal ion removal from the wastewater. Results and Discussion: The phytochemical analysis and FTIR results of the P. biglobosa showed that the leaf contains phenol, tannin, and flavonoids which acts as reducing, capping, and stabilizing agent required for synthesizing the silver nanoparticles. The prepared silver nanoparticles modified clay adsorbent Ag/clay, have evenly distributed stacks of pseudo-hexagonal plates, are rich in silica, possess silver nanoparticles in the frameworks, and contain functional groups suitable for binding heavy metals. The adsorptions of Zn2+, Pb2+, and Cu2+ from pharmaceutical wastewater onto the silver-modified clay were studied as a function of adsorbent dosage and contact time. The percentage removal results obtained showed that the adsorbent had up to 99.96%, 99.5%, and 99.44% removal efficiency for Zn2+, Pb2+, and Cu2+, respectively, which are better compared with previous studies. The adsorption process was feasible, spontaneous, and exothermic, with Langmuir and Pseudo-second-order models as best fits for the process. Conclusions: The adsorption of selected heavy metal ions onto the green synthesized silver-modified clay adsorbent (Ag/clay) was feasible, spontaneous, and exothermic in the order Zn2+>Pb2+>Cu2+ with Langmuir and Pseudo-second-order model best fitted for the process. These show that the synthesized silver oxide nanoparticles supported on local clay can be used as a potentially low-cost adsorbent to remove heavy metal ions from industrial wastewater.